Grabber UTVF007

  • I haven't been able to locate a genuine UTV007 either. However I have been able to get somewhat of successful testing on the UTVF007 on RPi Zero W / WS2812b running Jessie lite. I have a 4 LED test strip on my RPi running the WS281X-SPI via hypercon using the NO-CHANGE work around. What I did notice is that the lights react to the video as long as the video is connected prior to powering the Pi.


    I'm really new to all this and have no experience coding. Just thought I'd offer what works so far for me.

  • UTFV007 does work. I was able to find this: https://insaneboard.de/blog/?p=2491


    When translated, it essentially says you have to change “standard” : “no-change“,



    They have a modified HyperCon tool that provides this option. It was driving me crazy for days because the UTV007 is no longer manufactured, and I had no other options for grabbers.

  • It could be (maybe) resistance from the RCA cable. Resistance would cause a degradation of signal.
    Try a shorter cable or shorten current cable if able.


    Hope it helps.

  • I actually was able to make an adjustment via SSH


    /usr/bin/v4l2-ctl -d /dev/video0 --set-ctrl brightness=80


    but im not sure how to make it boot with that setting.


    My RCA is actually just a male to male adapter not an actual cable


  • i solder directly to the composite video, have a great signal with it.

  • Moin zusammen,


    ich hab leider auch ein Problem. Ich kenn mich kaum aus, wollte es aber trotzdem probieren eine Ambilight zu bauen.
    Also ich habe alle Komponenten zusammengebaut und angeschlossen (UTFV007 USB Grabber) Wie hier erklärt die HyperCon+hyperion-v4l2 heruntergeladen. Nach dem Neustart bekomm ich den Regenbogeneffekt aber es passiert nichts weiter. Könnte es an den Komponenten liegen?
    hdmi2av:https://www.amazon.de/gp/produ…age_o03_s00?ie=UTF8&psc=1
    hdmi Splitter: https://www.amazon.de/gp/produ…age_o03_s01?ie=UTF8&psc=1
    Den Grabber habe ich bei Robert geholt.


    Jetzt mache ich alle einstellungen in Hypercon, lade die Config, starte RPI neu und kann mir vom Grabber den Screenshot holen. DAS Problem dabei: Die LED leuchten nicht. Wenn ich im SSH reiter auf Start drücke erhalte ich den Regenbogeneffekt. Schalte ich dann auf die externe quelle leuten die LED nicht.
    Kann es sein, dass es an dem HDMI2AV Konverter liegt? Das TV -Bild geht auch ständig an und wieder aus.


    Derzeit bekommt der RPI noch ein bisschen zu wenig Strom (Unterspannung Blitz oben Rechts)



    Danke und viele Grüße


    hier noch die Log:
    Hyperion Ambilight Deamon (874)
    ssh in: Version : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in: Build Time: Aug 25 2019 10:39:29
    ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
    ssh in: HYPERION INFO: ColorTransform 'default' => [0; 111]
    ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 111]
    ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 111]
    ssh in: LEDDEVICE INFO: configuration:
    ssh in: {
    ssh in: "colorOrder" : "rgb",
    ssh in: "name" : "MyHyperionConfig",
    ssh in: "output" : "/dev/spidev0.0",
    ssh in: "rate" : 921600,
    ssh in: "type" : "apa102"
    ssh in: }
    ssh in: INFO: Creating linear smoothing
    ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
    ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
    ssh in: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in: INFO: Hyperion started and initialised
    ssh in: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in: BLACKBORDER INFO: threshold set to 0 (0)
    ssh in: BLACKBORDER INFO: mode:default
    ssh in: started
    ssh in: INFO: Json server created and started on port 19444
    ssh in: INFO: Proto server created and started on port 19445
    ssh in: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
    ssh in: BLACKBORDER INFO: threshold set to 0 (0)
    ssh in: BLACKBORDER INFO: mode:default
    ssh in: INFO: Frame grabber created and started
    ssh in: V4L2GRABBER INFO: width=720 height=480
    ssh in: V4L2GRABBER INFO: pixel format=YUYV
    ssh in: BLACKBORDER INFO: threshold set to 0 (0)
    ssh in: BLACKBORDER INFO: mode:default
    ssh in: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
    ssh in: V4L2GRABBER INFO: started
    ssh in: INFO: V4L2 grabber created and started
    ssh in: BORDER SWITCH REQUIRED!!
    ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
    ssh in: BORDER SWITCH REQUIRED!!
    ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
    ssh in: V4L2GRABBER INFO: stopped
    ssh in: EFFECTENGINE INFO: effect finished
    ssh in: INFO: Application closed with code 0
    ssh in: EFFECTENGINE INFO: Cleaning up Python interpreter


    ich bekomme es ums verrecken nicht zum laufen. =(

  • Hi there, i've got an UTVF007, i make the modify of no-change but it doesn't work, sometime leds turns on with right colors then they turn off...
    I made a video...

    Externer Inhalt www.youtube.com
    Inhalte von externen Seiten werden ohne Ihre Zustimmung nicht automatisch geladen und angezeigt.
    Durch die Aktivierung der externen Inhalte erklären Sie sich damit einverstanden, dass personenbezogene Daten an Drittplattformen übermittelt werden. Mehr Informationen dazu haben wir in unserer Datenschutzerklärung zur Verfügung gestellt.

    Can you help me?
    Thanks


    This is my config file

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!