Problème avec mon ambilight

  • Bonjour je voudrait savoir pourquoi je n’est aucune LED qui s’allume mon installations se comporte de :
    Merci d'avance a ceux qui pourront ma porter une solution.

  • voici se que sa me dit


    login as: osmc
    osmc@192.168.0.17's password:
    Linux MyAmbilight 4.14.78-2-osmc #1 SMP PREEMPT Sun Oct 28 14:59:13 UTC 2018 armv7l


    The programs included with the Debian GNU/Linux system are free software;
    the exact distribution terms for each program are described in the
    individual files in /usr/share/doc/*/copyright.


    Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
    permitted by applicable law.
    Last login: Sat Dec 22 15:29:38 2018 from 192.168.0.5
    osmc@MyAmbilight:~$ e) since Sat 2018-12-22 15:27:41 CET; 2min 2s ago
    -bash: syntax error near unexpected token `)'
    osmc@MyAmbilight:~$ sudo service hyperion status
    * hyperion.service - Hyperion Systemd service
    Loaded: loaded (/etc/systemd/system/hyperion.service; enabled; vendor preset: enabled)
    Active: failed (Result: exit-code) since Sat 2018-12-22 15:30:49 CET; 627ms ago
    Process: 1851 ExecStart=/usr/bin/hyperiond /etc/hyperion/hyperion.config.json (code=exited, status=1/FA
    Main PID: 1851 (code=exited, status=1/FAILURE)


    Dec 22 15:30:49 MyAmbilight systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
    Dec 22 15:30:49 MyAmbilight systemd[1]: Stopped Hyperion Systemd service.
    Dec 22 15:30:49 MyAmbilight systemd[1]: hyperion.service: Start request repeated too quickly.
    Dec 22 15:30:49 MyAmbilight systemd[1]: Failed to start Hyperion Systemd service.
    Dec 22 15:30:49 MyAmbilight systemd[1]: hyperion.service: Unit entered failed state.
    Dec 22 15:30:49 MyAmbilight systemd[1]: hyperion.service: Failed with result 'exit-code'.

  • login as: osmc
    osmc@192.168.0.17's password:
    Linux MyAmbilight 4.14.78-2-osmc #1 SMP PREEMPT Sun Oct 28 14:59:13 UTC 2018 armv7l


    The programs included with the Debian GNU/Linux system are free software;
    the exact distribution terms for each program are described in the
    individual files in /usr/share/doc/*/copyright.


    Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
    permitted by applicable law.
    Last login: Sat Dec 22 15:30:35 2018 from 192.168.0.5
    osmc@MyAmbilight:~$ ls /etc/hyperion
    hyperion.config.json
    osmc@MyAmbilight:~$


    il me dit qu'il trouve le ficher

  • je vient de supprimer Hypérion et de le réinstaller


    osmc@MyAmbilight:~$ sudo service hyperion status
    * hyperion.service - Hyperion Systemd service
    Loaded: loaded (/etc/systemd/system/hyperion.service; enabled; vendor preset: enabled)
    Active: active (running) since Sat 2018-12-22 16:01:58 CET; 2s ago
    Main PID: 3582 (hyperiond)
    CGroup: /system.slice/hyperion.service
    `-3582 /usr/bin/hyperiond /etc/hyperion/hyperion.config.json


    Dec 22 16:01:58 MyAmbilight hyperiond[3582]: INFO: Json server created and started on port 19444
    Dec 22 16:01:58 MyAmbilight hyperiond[3582]: INFO: Proto server created and started on port 19445
    Dec 22 16:01:58 MyAmbilight hyperiond[3582]: V4L2GRABBER INFO: width=720 height=576
    Dec 22 16:01:58 MyAmbilight hyperiond[3582]: V4L2GRABBER INFO: pixel format=YUYV
    Dec 22 16:01:58 MyAmbilight hyperiond[3582]: BLACKBORDER INFO: threshold set to 0 (0)
    Dec 22 16:01:58 MyAmbilight hyperiond[3582]: BLACKBORDER INFO: mode:default
    Dec 22 16:01:58 MyAmbilight hyperiond[3582]: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
    Dec 22 16:01:58 MyAmbilight hyperiond[3582]: V4L2GRABBER INFO: started
    Dec 22 16:01:58 MyAmbilight hyperiond[3582]: INFO: V4L2 grabber created and started
    Dec 22 16:01:58 MyAmbilight hyperiond[3582]: KODICHECK INFO: Kodi Connected

  • Cette fois ci tout est ok du côté logiciel.
    Si maintenant tes LEDs ne fonctionnent toujours pas, il faut que tu nous en dise plus sur ton schéma de montage.
    As-tu l'arc en ciel qui se fait lorsque tu démarre le service de Hyperion ?
    Commande : sudo service hyperion restart

  • non je n’est pas arc-en-ciel j’ai essayer tous les montage possible avec cet bande LED a 4 fil mai rien ni fait on ma dit de mettre un Arduino nano entre les Raspberry et les LED si tu a un chema de montage et les configuration de Hypérion et de Arduino je sui preneur merci beaucoup de m’aider

  • Je n'ai pas ce type de configuration donc désolé je ne peux pas te fournir de solution toute faite.
    Poste un schéma de ce que tu as fais actuellement ainsi que les ports GPIO auxquels tu as connecté les fils

  • A priori d'après mes recherche sur la toile, l'architecture du raspi ne permet pas un bon controle pour ces led.
    al meilleure option est de connecter une arduino nano (ou uno) au port usb du raspi et de mettre les leds sur l'arduino

  • A priori d'après mes recherche sur la toile, l'architecture du raspi ne permet pas un bon controle pour ces led.
    al meilleure option est de connecter une Arduino nano (ou uno) au port usb du raspi et de mettre les leds sur l'arduino


    Bonjour merci pour ton aide j’ai bien des Arduino nano sous le coude mai je ne sait pas comment les brancher ni le scripte a inclure dans l’Arduino nano si tu avait toute ses réponse je pourrait teste merci beaucoup

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!